How to maintain old Bora
With the increase in car ownership, the maintenance issues of older models have gradually become the focus of attention of car owners. As a classic car, the maintenance needs of the old Bora are different from those of new cars. This article will combine the hot topics and hot content on the Internet in the past 10 days to introduce you to the maintenance points of the old Bora in detail to help you extend the life of your car.
1. The Importance of Maintenance of Old Bora
Due to the long service life of the old Bora, the wear and aging problems of various parts are more prominent. Regular maintenance can not only ensure driving safety, but also improve vehicle performance and avoid major failures caused by small problems. The following are the core points of maintenance for Old Bora:
| Maintenance items | Recommendation cycle | Things to note |
|---|---|---|
| oil change | Every 5000-8000 kilometers | Use fully synthetic motor oil suitable for older cars |
| transmission oil | every 60,000 kilometers | Different oil products for manual transmission and automatic transmission |
| brake system | Every 2 years or 40,000 kilometers | Check brake pad thickness and brake fluid status |
| cooling system | every 2 years | Replace antifreeze and check pipelines |
| timing belt | Every 80,000-100,000 kilometers | Must be replaced on time to avoid breakage |
2. Key points of engine maintenance
After long-term use of the old Bora engine, special attention needs to be paid to the following aspects:
1.Carbon deposit cleaning:Old cars are prone to carbon deposits, so it is recommended to use fuel additives or have them professionally cleaned every 20,000 kilometers.
2.Valve cover gasket:Check whether there is oil leakage and replace aging gaskets in time.
3.Spark plug:Depending on the material, nickel alloy spark plugs should be replaced every 30,000 kilometers, and platinum spark plugs can last up to 80,000 kilometers.
4.Air intake system:Clean the throttle valve and air filter regularly to ensure smooth air intake.
| engine parts | FAQ | solution |
|---|---|---|
| oil pump | Not enough pressure | Check if the filter is clogged |
| water pump | Water leakage and abnormal noise | Replace the sealing ring or replace the entire |
| high voltage line | Aging leakage | Check the resistance value and replace it in time |
3. Chassis system maintenance
The chassis system of Old Bora is prone to the following problems after long-term use:
1.Suspension system:Check whether the shock absorber is leaking oil and whether the rubber bushing is aged and cracked.
2.Steering system:Pay attention to the status of the steering assist oil and replenish or replace it in time.
3.Drive shaft:Check whether the dust cover is damaged to avoid wear caused by loss of grease.
4.Tires:In addition to checking tire pressure and tread depth, pay attention to tire aging cracks.
| Chassis components | Checkpoints | Replacement standards |
|---|---|---|
| lower arm | Ball head clearance | If the looseness exceeds 3mm, it needs to be replaced. |
| shock absorber | Rebound performance | Cannot return quickly after pressing |
| Steering rod | Dust jacket status | Replace immediately if damaged |
4. Electrical system maintenance
The electrical system of old cars is prone to the following problems:
1.Battery:Check whether the electrode is oxidized and whether the battery is sufficient. The general service life is 3-5 years.
2.Generator:Test the output voltage, it should normally be between 13.8-14.4V.
3.Line aging:Check the wiring harness for damage to avoid the risk of short circuit.
4.Lighting system:Regularly check that all lights are working properly.
5. Interior and exterior maintenance
1.Interior cleaning:Regular cleaning can extend the life of your interior, paying special attention to the headliner and seats.
2.Paint protection:Old car paint is prone to oxidation, and regular waxing can effectively protect it.
3.Rubber parts maintenance:Use special protective agents to delay the aging of rubber parts such as door seals.
6. Summary
The maintenance of old Bora needs to be more detailed and comprehensive. In addition to routine maintenance items, special attention should be paid to the inspection and replacement of aging parts. It is recommended to conduct a comprehensive inspection every six months to detect and solve problems in time. With scientific maintenance, your car can remain in good condition and continue to serve you for many years.
Final reminder: It is best to choose a professional repair shop for old car maintenance and use genuine parts. Although the cost is slightly higher, it can ensure the quality of repair and avoid making a small gain.
check the details
check the details
en
